Updated Diretta Host PC Setup Notes/Diretta 導入メモ 20261107改訂
ト
トマト栽培者
started a topic
1 day ago
I have updated the information to include the latest insights gained since October 31st, as well as the contents of the official Diretta articles.
By the way, with the release of the Intel version, the existence of dedicated Zen 3 and Zen 4 versions has also been revealed. If you are already using Diretta Host PC, launching "Diretta Asio Configure" allows you to check whether the correct version is selected (indicated by the red box in the image).
If it is not set to the optimized version, you will need to boot from the Install USB and reinstall the firmware via "Diretta Activate." An error may temporarily appear on the Host PC monitor during the process, but if you wait a moment, the system will automatically reboot and complete the installation. Even if an error pops up along the way, please just leave it alone for a short while and see how it goes.
トマト栽培者
I have updated the information to include the latest insights gained since October 31st, as well as the contents of the official Diretta articles.
By the way, with the release of the Intel version, the existence of dedicated Zen 3 and Zen 4 versions has also been revealed. If you are already using Diretta Host PC, launching "Diretta Asio Configure" allows you to check whether the correct version is selected (indicated by the red box in the image).
If it is not set to the optimized version, you will need to boot from the Install USB and reinstall the firmware via "Diretta Activate." An error may temporarily appear on the Host PC monitor during the process, but if you wait a moment, the system will automatically reboot and complete the installation. Even if an error pops up along the way, please just leave it alone for a short while and see how it goes.
10月31日以降に得られた最新の知見、およびDirettaの公式記事の内容を反映して情報を更新しました。
なお、Intel版のリリースに伴い、Zen 3およびZen 4専用バージョンの存在も明らかになりました。すでにDiretta Host PCをご利用中の方は、「Diretta Asio Configure」を起動することで、適切なバージョンが選択されているかどうかを確認できます（画像内の赤い枠で示された箇所をご確認ください）。
最適化されたバージョンが選択されていない場合は、インストール用USBから起動し、「Diretta Activate」を通じてファームウェアを再インストールする必要があります。その際、Host PCのモニターに一時的にエラーが表示されることがありますが、そのまましばらく待つとシステムが自動的に再起動し、インストールが完了します。途中でエラーが表示された場合でも、慌てずにそのまましばらく様子を見てください。