Pinout OrangePi-I2S R5 : Diretta Assistenza

Pinout OrangePi-I2S R5 Print

Created by: Y U

Modified on: Fri, 18 Aug, 2023 at 1:17 AM

I2S connector 4pin 5pin is power.

4pin is GND
5pin is I2S IO Voltage input 1.8 to 3.3v

Normally CON12 1pin and 17pin is IO 3.3v output
Pull up ICC-IO 18 pin then Disable VCC-IO

It case 1pin and 17pin is IO 3.3v input

If differential clock input use the put 100 ohm RD resistor on I2S module (after R3

1pin mark

Y is the author of this solution article.

Did you find it helpful? Yes No

Help Desk Software by Freshdesk