Link Speed on OS Ethernet (Not recommended : Diretta Assistenza

Link Speed on OS Ethernet (Not recommended Print

Created by: Y U

Modified on: Sat, 17 Oct, 2026 at 5:29 AM

Change the OS settings

As this is used via the control port, if it is not compatible with the hub, you may, in the worst-case scenario, be unable to connect

If there are no issues, please use the ‘Auto’ setting

10BASE = Spped 10 Auto-negotiation disable

100BASE = Spped 100 Auto-negotiation disable

100BASE = Spped 1000 Auto-negotiation enable

Y is the author of this solution article.

Did you find it helpful? Yes No

Help Desk Software by Freshdesk