Diretta Streaming Test - Doppio


Clock:


AS318-B-903168 / AS318-B-983040

(PCM768/DSD512)


Display : WaveShare 12955

The base frame is stainless steel.

OrangePi-I2S (Lucia Shakerato I2S License)

USB-DAC cannot be used.


One power supplie, 5V.

Can change ,Two power supplies, 3.3V and 5V,


Do not make a mistake.

3.3V 5.5/2.5

   5V 5.5/2.1



SW1

  1,2 ON  3,4 OFF  DATA/BIT    /SYNC (default on

  1,2 OFF 3,4 ON  DATA/SYNC/BIT       (SWAP BIT SYNC

Do not use any other combination.


SW2

  1 ON 5V output to 18pin

  2 ON connect GPO7 18pin 

  3 ON connect GPO8 19pin

  4 ON GND to 17pin (default on

Do not turn on 1 and 2 at the same time.
If you set the control to AQWO, do not turn 1,4 ON.(turn on 2,3


SW3

  1 ON 5V use Divder (not use DC conector)

  2 ON connect 18pin 

  3,4 OFF  Divide 2

  3 ON 4 OFF  Divide 4

  3 OFF 4 ON  Invert (no divide  

Do not turn on 1 and 2 at the same time.

If you set the control to AQWO, do not turn 1 ON.(turn on 2


If the clock divider is an older model, see R4.
https://help.diretta.link/en/support/solutions/articles/73000607071-dst-00-i2s-lvds-r4


AQWO setting

 



DST-00 R5

connector NAMEnamedetailInvert(config DATA SYNC Swap(config DSD LR1-ON 2-ON (SW13-ON 4-ON (SW1SW2
1TMDS Data2+DATA_PI2S DATA/DSD-RightDATA_NI2S DATA/DSD-Left


2TMDS Data2 shieldGNDGND


3TMDS Data2-DATA_NDATA_P


4TMDS Data1+BIT_PI2S BIT/DSD BIT

I2S BIT/DSD BITI2S SYNC/DSD
5TMDS Data1 shieldGND


6TMDS Data1-BIT_N


7TMDS Data0+SYNC_PI2S SYNC/DSD-LeftSYNC_NI2S SYNC/DSD-RighI2S SYNC/DSDI2S BIT/DSD BIT
8TMDS Data0 shieldGNDGND
9TMDS Data0-SYNC_NSYNC_P
10TMDS Clock+CLK_PCLOCK




11TMDS Clock shieldGND




12TMDS Clock-CLK_N




13CECIO3GPO3




14UtilityIO4GPO4




15SCLDSDPCM/DSD (GPS2




16SDAnMUTEMUTE (GPS1




17GNDGNDGPO6



GPO6 / GND ( 4 ON
18+5VDETGPO7



OPEN / 5V ( 1 ON  2 OFF/ GOP7 ( 1 OFF 2 ON
19HPDopenGPO8



OPEN / GPO8 ( 3 ON